A lot of people are told they need a soil report before they really understand what that document contains. They know it has something to do with the ground, permits, or foundation design, but they do not know what information they are actually paying for, what the report is supposed to tell them, or how it helps the project move forward.
That is why this page matters. In many cases, the owner is not looking for a generic definition. They are really asking a more practical question:
“What am I actually going to receive, and how does that information help my project?”
The short answer is that a soil report usually includes a combination of site information, subsurface findings, engineering interpretation, and project-specific geotechnical recommendations. Depending on the job, it may discuss soils, fill, groundwater, bearing conditions, excavation considerations, drainage issues, and other factors relevant to foundations, retaining walls, basement work, additions, or other proposed construction.
This guide explains what is commonly included in a soil report in Ontario, why some reports are different from others, what sections matter most, and how to read the document from a practical project point of view.
Written for Ontario projects by Jaspreet Singh, P.Eng.
Request a Soil Report Quote View Services
A soil report commonly includes:
In other words, a soil report is not just a list of soils found in the ground. It is meant to connect site conditions to practical design and construction decisions.
Before getting into the specific sections, it helps to understand what the report is actually for.
A soil report is not only a descriptive document. It is an engineering document. Its purpose is usually to answer questions like:
That is why the most useful parts of a soil report are not just the raw observations. The most useful parts are the interpretation and recommendations.
One of the most important things to understand is that not every soil report includes exactly the same information.
The contents vary depending on:
For example:
So when people ask what is included in a soil report, the honest answer is: there are common core elements, but the details should match the project.
Most soil reports begin by identifying the project and the reason the investigation was carried out.
This section often includes:
This matters because the entire report is supposed to be tied to a specific job. A report prepared for one scope may not be appropriate for a completely different project at the same site.
A typical report also includes a description of the site itself. Depending on the project, this may discuss:
This section helps set the context for the geotechnical findings. It explains what kind of property the engineer was dealing with and what broader site issues might matter to the project.
A soil report usually explains what investigation work was actually performed.
That may include reference to:
This section is important because it defines what the report is based on. A report is not claiming to know everything everywhere below the site. It is reporting on the conditions observed through the investigation scope that was actually completed.
Related reading: What happens during a geotechnical investigation?
This is one of the core sections people usually think of first. It describes what was found below grade at the investigation locations.
Depending on the site, this may include observations about:
This part matters because it begins answering the basic question:
What is actually in the ground where the project is supposed to be built?
That may sound simple, but it is one of the most important questions in the entire project.
If fill or disturbed ground is present, that is often specifically noted because it can affect how the design should proceed.
This is important because fill is not automatically the same as competent native soil. Depending on its composition and history, it may be less predictable and less suitable for certain support assumptions.
That is one reason many projects run into trouble when a soil report is skipped. What looked like normal ground from the surface may turn out to be filled or disturbed material below.
Many soil reports also include groundwater or moisture-related observations made at the time of investigation.
This may include:
This section matters because water often affects:
It is also important to remember that groundwater observations are usually tied to the conditions at the time of investigation. They still provide useful information, but water behavior can vary seasonally and site conditions should always be considered in context.
Related reading: Drainage, groundwater, and frost in Ontario
This is one of the most important sections in the report, and it is the part many non-engineers overlook.
A soil report is not just a record of what was found. It is also the engineer’s interpretation of what those findings mean for the project.
That interpretation may address:
This is the part that turns site observations into practical engineering value.
Where the project involves foundations, footings, or support assumptions, the report often includes recommendations related to bearing or founding conditions.
Depending on the scope, that may involve comments about:
This is one of the most common reasons soil reports are requested in the first place. The design team often needs better support information before finalizing structural assumptions.
Related reading: Understanding soil bearing capacity
Many soil reports include notes relevant to excavation or construction. These may cover issues such as:
This is especially relevant for projects involving:
That is why a soil report can be useful not just to the permit reviewer or engineer, but also to the contractor and owner.
Depending on the site and the project, the report may include observations or recommendations related to drainage.
This becomes especially important when:
Drainage is sometimes treated as secondary by owners, but on many projects it is a major part of why geotechnical input matters at all.
A good soil report should not read like a generic article. It should include recommendations tied to the actual project.
That may mean the report is written to support:
This is one of the best ways to judge whether a report is useful: does it clearly connect the investigation findings to the project the owner is actually trying to build?
Most soil reports also include limitations, assumptions, or scope notes. These are important because the report is based on the work that was actually done and the project that was actually described.
This section often helps clarify:
This is not just legal wording. It is also part of understanding how the report should be used properly.
When owners understand what is included in a soil report, they can make much better decisions about:
A lot of people think they are paying only for someone to “check the dirt.” In reality, they are often paying for:
It is also helpful to understand what a soil report is not meant to do.
A soil report is not usually:
Instead, it is one important technical input that helps the design and approval process rely on better information.
If you are not an engineer, the most practical way to read a soil report is to focus on:
That is usually more useful than getting lost in every technical phrase. The big question is always:
What does this report change about how the project should be designed or built?
Different project types tend to care about different report sections most:
Related reading: House additions, basement permits, underpinning, retaining walls, and decks and backyard structures
Owners often ask what is included in the report because they are also thinking about:
Understanding the contents of the report helps answer those questions more clearly, because it shows that the value is not only in the field visit. It is also in the engineering interpretation and recommendations that come afterward.
Related reading: Geotechnical investigation costs in Ontario and how long a soil report takes in Ontario
This is an important practical issue. A soil report is only as useful as its relevance to the actual project.
For example, problems can arise if:
That is why project-specific scope is such an important part of what is included in a good soil report.
The best way to get more value from a soil report is to make sure:
That is when the report becomes most useful.
This question comes up all the time across Ontario, especially on residential projects where owners want to understand what they are receiving before they commit to geotechnical work. It is especially common on projects in places like Toronto, Mississauga, Brampton, Vaughan, Markham, Oakville, and across Ontario where additions, basement work, underpinning, retaining walls, or backyard structures are being planned.
You should ask about what will be included in the soil report early if:
That is usually much better than treating the report as a generic formality.
So, what information is included in a soil report?
A typical soil report includes site and project information, a description of the investigation performed, subsurface conditions encountered, groundwater or moisture observations, engineering interpretation, and project-specific geotechnical recommendations. Depending on the job, it may also include foundation-related guidance, bearing considerations, excavation notes, drainage comments, and other design-support information.
The most important point is that a soil report is not just a list of soils. It is a technical document meant to help the project team make better decisions based on actual site conditions.
When the report is scoped properly and used early enough, it can reduce uncertainty, improve design coordination, support permits, and help avoid costly surprises later.
Get a Quote View Services Find Your City
A soil report typically includes project and site information, a description of the investigation performed, subsurface conditions, soil or fill observations, groundwater observations, engineering interpretation, and recommendations relevant to foundations, bearing, excavation, drainage, or construction depending on the project.
No. Soil reports vary depending on the project type, site conditions, investigation scope, and what the report is intended to support.
Many reports include bearing-related recommendations where foundation support is relevant, but the exact information depends on the project and scope.
Many reports include groundwater or moisture observations at the time of investigation, along with related comments where water conditions matter to the project.
Often yes. Depending on the project, the report may include excavation guidance, construction considerations, or notes relevant to how the site conditions may affect the planned work.
Yes, many soil reports include geotechnical recommendations intended to support structural design, foundation planning, retaining wall design, drainage-related decisions, or other project-specific engineering considerations.
Often yes, depending on the project. A soil report may be submitted as part of a permit package or used to support design assumptions during review, but it needs to match the project scope.
That is common. The most important parts usually relate to what was found below grade, what it means for the project, and what the design or construction team should do with that information.
Yes. It can help the contractor understand excavation conditions, water-related issues, support assumptions, and other site factors that may affect planning and construction.
For many projects, the most important part is the combination of engineering interpretation and project-specific recommendations, because that is what turns site observations into useful decisions.